Ninthore Overseas Is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel 316Ti Wire Mesh, which makes up approximately 30 % of its composition, with iron being found in equal if not greater amounts. Our Stainless Steel 316Ti Hexagonal Wire Mesh provides corrosion resistance, and specifically resistance from chloride stress cracking. This SS 316Ti Welding Wire Mesh is practically immune to chlorine and was designed to be used in sulfuric environments. Our Stainless Steel 316Ti Netting Wire Mesh is commonly applied in acidic and / or corrosive environments, such as those that contain phosphoric and nitric acid.

Stainless Steel 316Ti Wire Mesh Manufacturer In India | Stainless Steel 316Ti Wire Mesh Manufacturer In Mumbai | Stainless Steel 316Ti Wire Mesh Exporter In India | Stainless Steel 316Ti Wire Mesh Exporter In Mumbai | Stainless Steel 316Ti Wire Mesh Supplier In India | Stainless Steel 316Ti Wire Mesh Supplier In Mumbai | Stainless Steel 316Ti Wire Mesh Stockist In India | Stainless Steel 316Ti Wire Mesh Stockist In Mumbai 
Stainless Steel 316Ti Wire Mesh

Stainless Steel 316Ti Wire Mesh

This Stainless Steel 316Ti Woven Wire Mesh has proven to be excellent under corrosive conditions and various forms of media. As a result, our SS 316Ti Spring Steel Wire Mesh is commonly found in processing applications — such as food or chemicals — along with pharmaceutical storage and processing. This Stainless Steel 316Ti Fencing Wire Mesh is pliable under both hot and cold working practices; however it does have some limitations in regards to temperature.

Hot – working practices in our SS 316Ti Wire Mesh should stay between 2100 Degree F — 2250 Degree F. Temperature control in 316Ti SS Wire Mesh is essential in terms of work – hardening, forging and welding the metal due to potential risks to its stability. Overall, our Grade 316Ti Wire Mesh is an excellent alternative to more expensive metals with similar applications.

SS 316TI Wiremesh Specifications
Specifications : ASTM A 164 ASME SA 164
Standard : ASTM, AISI International Standards
Length : 30m to 100″
Width : 1m to 48″
Type : Wire Mesh , Hexagonal Wiremesh, Welding Wiremesh, Netting Wiremesh, Woven Wiremesh , Spring Steel wire mesh, Fencing Wiremesh etc.
316TI Stainless Steel Wire Mesh Chemical Composition
Grade C Mn Si P S Cr Mo Ni N
SS 316Ti 0.08 max 2 max 0.75 max 0.045 max 0.030 max 16.00 – 18.00 2.00 – 3.00 10.00 – 14.00 68.395 min
Stainless Steel 316TI Wiremesh Mechanical Properties
Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1399 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %
Equivalent Grades for 316TI Stainless Steel Wiremesh
SS 316Ti 1.4571 S31635 SUS 316Ti 320S31 08Ch17N13M2T Z6CNDT17‐123 X6CrNiMoTi17-12-2
SS 316TI Wire Mesh Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
316TI Steel Wiremesh Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test


• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)