Ninthore Overseas Is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel 347 Wire Mesh, which contains 18 percent of chromium and 8 percent of nickel. In principle, heat – treating already takes place when our Stainless Steel 347 Hexagonal Wire Mesh is hot – rolled at a particular temperature and cooled afterward at a certain rate, but there are as well many heat – treating process facilities specifically designed to produce particular microstructures and properties. By varying the ratio of oxygen and argon in this Stainless Steel 347 Welding Wire Mesh, it is possible to remove carbon to controlled levels by oxidizing it to carbon monoxide without also oxidizing and losing expensive chromium.

Stainless Steel 347 Wire Mesh Manufacturer In India | Stainless Steel 347 Wire Mesh Manufacturer In Mumbai | Stainless Steel 347 Wire Mesh Exporter In India | Stainless Steel 347 Wire Mesh Exporter In Mumbai | Stainless Steel 347 Wire Mesh Supplier In India | Stainless Steel 347 Wire Mesh Supplier In Mumbai | Stainless Steel 347 Wire Mesh Stockist In India | Stainless Steel 347 Wire Mesh Stockist In Mumbai 
Stainless Steel 347 Wire Mesh

Stainless Steel 347 Wire Mesh

Our SS 347 Netting Wire Mesh is not harden able by heat treatment and is nonmagnetic. Typical applications of our Stainless Steel 347 Woven Wire Mesh include aircraft and the dairy and food – processing industries. This Stainless Steel 347 Spring Steel Wire Mesh contains 10.5 percent to 27 percent chromium and is nickel – free; because of their low carbon content.

Our SS 347 Fencing Wire Mesh are not harden able by heat treatment and have less critical anticorrosion applications, such as architectural and auto trim. After solidifying this SS 347 Wire Mesh, the ingot was stripped from the mould, reheated, and then reduced in size by hot – rolling in a primary (blooming) mill to give billets in section.

SS 347 Wiremesh Specifications
Specifications : ASTM A 164 ASME SA 164
Standard : ASTM, AISI International Standards
Length : 30m to 100″
Width : 1m to 48″
Type : Wire Mesh , Hexagonal Wiremesh, Welding Wiremesh, Netting Wiremesh, Woven Wiremesh , Spring Steel wire mesh, Fencing Wiremesh etc.
347 Stainless Steel Wire Mesh Chemical Composition
Grade C Mn Si P S Cr Mo Ni N
347 min. 17.0 9.0
max. 0.08 2.0 1.0 0.040 0.030 20.0 13.0
Stainless Steel 347 Wiremesh Mechanical Properties
Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
347 515 205 40 92 201
Equivalent Grades for 347 Stainless Steel Wiremesh
SS 347 1.4550 S34700 SUS 347 08Ch18N12B X6CrNiNb18-10
SS 347 Wire Mesh Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
347 Steel Wiremesh Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test


• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)