Ninthore Overseas Is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel 410 Wire Mesh, which have austenite as their primary phase (face centered cubic crystal). SS 410 Hexagonal Wire Mesh is used for a variety of applications where good corrosion and outstanding hardness is necessary. Stainless Steel 410 Welding Wire Mesh also offers higher creep, stress to rupture and tensile strength at elevated temperatures, in addition to excellent corrosion resistance and strength properties. Stainless Steel 410 Netting Wire Mesh contains chromium and nickel (sometimes manganese and nitrogen), structured around the composition of iron, 18 % chromium, and 8 % nickel.

Stainless Steel 410 Wire Mesh Manufacturer In India | Stainless Steel 410 Wire Mesh Manufacturer In Mumbai | Stainless Steel 410 Wire Mesh Exporter In India | Stainless Steel 410 Wire Mesh Exporter In Mumbai | Stainless Steel 410 Wire Mesh Supplier In India | Stainless Steel 410 Wire Mesh Supplier In Mumbai | Stainless Steel 410 Wire Mesh Stockist In India | Stainless Steel 410 Wire Mesh Stockist In Mumbai 
Stainless Steel 410 Wire Mesh

Stainless Steel 410 Wire Mesh

Austenitic SS 410 Woven Wire Mesh are not harden able by heat treatment, which further refer to the lower carbon content to allow for greater corrosion protection when welding. Stainless Steel 410 Spring Steel Wire Mesh is austenitic steel containing 18 % – 20% chromium and 8 % – 10% nickel. SS 410 Fencing Wire Mesh is not subject to embrittlement or loss of corrosion resistance in the heat – affected zones that affects many other straight chromium alloys.

410 Stainless Steel Wire Mesh is especially valuable for applications requiring high – temperature scaling resistance and for those applications where it gives only marginal protection. SS 410 Wire Mesh is not usually used at temperatures exceeding 800 Degree F (427 Degree C) due to quick hardening and loss of corrosion resistance.

SS 410 Wiremesh Specifications
Specifications : ASTM A 164 ASME SA 164
Standard : ASTM, AISI International Standards
Length : 30m to 100″
Width : 1m to 48″
Type : Wire Mesh , Hexagonal Wiremesh, Welding Wiremesh, Netting Wiremesh, Woven Wiremesh , Spring Steel wire mesh, Fencing Wiremesh etc.
410 Stainless Steel Wire Mesh Chemical Composition
Grade C Mn Si P S Cr Mo Ni N
410 min. 11.5
max. 0.15 1.0 1.00 0.040 0.030 13.5 0.75
Stainless Steel 410 Wiremesh Mechanical Properties
Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
410 480 275 16 95 201
Equivalent Grades for 410 Stainless Steel Wiremesh
Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
410 S41000 410S21 56A 1.4006 X12Cr13 2302 SUS 410
SS 410 Wire Mesh Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
410 Steel Wiremesh Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test


• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)