Ninthore Overseas Is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel 904L Wire Mesh, which is a harden able high – carbon chromium steel. When put under heat treatment, Stainless Steel 904L Hexagonal Wire Mesh attains the highest hardness levels of any grade of stainless steel. Resistance to sulphuric acid is particularly exceptional, but Stainless Steel 904L Welding Wire Mesh shows useful resistance in phosphoric acid, nitric acid as well as in chloride environments. SS 904L Netting Wire Mesh has good mechanical properties at both ambient and elevated temperatures, up to approximately 930 Degree F (500 Degree C) and is readily fabricated by usual industrial processes.

Stainless Steel 904L Wire Mesh Manufacturer In India | Stainless Steel 904L Wire Mesh Manufacturer In Manufacturer In Mumbai | Stainless Steel 904L Wire Mesh Exporter In India | Stainless Steel 904L Wire Mesh Exporter In Mumbai | Stainless Steel 904L Wire Mesh Supplier In India | Stainless Steel 904L Wire Mesh Supplier In Mumbai | Stainless Steel 904L Wire Mesh Stockist In India | Stainless Steel 904L Wire Mesh Stockist In Mumbai
Stainless Steel 904L Wire Mesh

Stainless Steel 904L Wire Mesh

Stainless Steel 904L Woven Wire Mesh is composed of carbon, chromium, copper, iron, manganese, molybdenum, nickel, phosphorous, silicon, and Sulphur. Application of SS 904L Spring Steel Wire Mesh could result in real cost savings when carefully compared to higher – cost alloys to determine if the necessary resistance is obtained in the chosen media. Post weld heat treatment of SS 904L Fencing Wire Mesh may not be required for use in some corrosive environments due to resistance to inter – granular corrosion in the as-welded condition.

We use a range of transport partners to ship overnight these 904L Stainless Steel Wire Mesh within foreign countries, and offer a full range of logistics solutions from priority express services to more cost – effective economy shipments all around the globe.

SS 904L Wiremesh Specifications
Specifications : ASTM A 164 ASME SA 164
Standard : ASTM, ASME International Standards
Length : 30m to 100″
Width : 1m to 48″
Type : Wire Mesh , Hexagonal Wiremesh, Welding Wiremesh, Netting Wiremesh, Woven Wiremesh , Spring Steel wire mesh, Fencing Wiremesh etc.
904L Stainless Steel Wire Mesh Chemical Composition
Grade C Mn Si P S Cr MO Ni Cu
904L min. 19.0 4.0-5.0 23.0 1.0
max. 0.20 2.0 1.0 0.045 0.035 23.0 28.0 2.0
Stainless Steel 904L Wiremesh Mechanical Properties
Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
446 490 220 35 70-90 typical
Equivalent Grades for 904L Stainless Steel Wiremesh
SS 904L 1.4539 N08904 SUS 904L 904S13 STS 317J5L Z2 NCDU 25-20 X1NiCrMoCu25-20-5
SS 904L Wire Mesh Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
904L Steel Wiremesh Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test


• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)