Ninthore Overseas is one of the Leading Manufacturer And Exporter of High quality Monel Alloy 400 Washers has excellent mechanical properties at sub – zero temperatures. However, excellent results can be obtained in these Monel 400 Flat Washers if you make the correct choices for tooling and machining. Monel 400 Lock Washers is a solid – solution binary alloy, which can be readily joined and fabricated. As nickel and copper are mutually soluble in all proportions, these Monel 400 Sealing Washers is a single – phase alloy. Monel 400 Split Washers will exhibit only randomly dispersed non – metallic inclusions, where these consist of metal sulphide or silicates.
By proper control of the amount of hot or cold work and by the selection of appropriate thermal treatments, finished fabrications in these Monel 400 Slot Washers can be produced to a rather wide range of mechanical properties. Monel 400 Machine Washer has a melting range of 1300 Degree C – 1350 Degree C and an electrical conductivity. These Monel 400 Star Washers is used in the section of Alkylation units in direct contact with concentrated hydrofluoric acid.
Monel Alloy 400 Washers | Monel Alloy 400 Washers | Monel Alloy 400 Washers | Monel Alloy 400 Washers | Monel Alloy 400 Washers | Monel Alloy 400 Washers | Monel Alloy 400 Washers
Monel 400 Wire Spring Washers offers exceptional resistance to hydrofluoric acid in all concentrations up to the boiling point. These Monel 400 Flat Spring Washer is perhaps the most resistant of all commonly used engineering alloys, where strength and hardness increases with only slight impairment of ductility or impact resistance.
Monel 400 Washer Specifications
|Standard||:||DIN, ASTM, BS and all International Standards|
|Length||:||M02 to M33|
|Size||:||3 mm to 200 mm|
|Type||:||Flat Washer, Lock Washer, Sealing Washer, Split Washer, Slot Washer, Machine Washer, Star Washer SPRINGS – Wire Spring & Flat Spring|
|Monel 400||0.30 max||2.00 max||0.50 max||0.24max||28.0-34.0||2.50 max||63.00 min||–|
|Element||Density||Melting Point||Tensile Strength||Yield Strength (0.2%Offset)||Elongation|
|Monel 400||8.8 g/cm3||1350 °C (2460 °F)||Psi – 80,000 , MPa – 550||Psi – 35,000 , MPa – 240||40 %|
|Monel 400||2.4360||N04400||NW 4400||NA 13||МНЖМц 28-2,5-1,5||NU-30M||NiCu30Fe|
- Off-Shore Oil Drilling Companies
- Power Generation
- Gas Processing
- Specialty Chemicals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Pulp and Paper Industry
We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.
We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Monel Alloy 400 Washers
Ninthore Overseas is one of the Leading Manufacturer And Exporter of High quality Monel Alloy 400 Washers has excellent mechanical properties at sub – zero temperatures.
Product Brand: Ninthore Overseas
Product In-Stock: InStock