Ninthore Overseas is one of the Leading Manufacturer And Exporter of Stainless Steel 316Ti Flanges, which shows resistance against acid corrosion in a variety of environments. Lower temperatures provide better resistance, but Stainless Steel 316Ti Slip On Flanges is able to withstand up to a 10 % acid solution, that has been diluted, at elevated temperatures. However, Stainless Steel 316Ti Long Weld Neck Flanges shows very little resistance against chlorine or sulfuric solutions at any given temperature. Given their similar composition and characteristics, it is possible for Stainless Steel 316Ti Spacer Flanges to become dually certified.

This metal intensifies Stainless Steel 316Ti Threaded Flanges present ability to withstand intergranular corrosion for maximum capabilities. Additionally, the columbium allows for our Stainless Steel UNS S31635 Weld Neck Flanges to undergo repeated heating in temperatures up to 1650 Degree F. As a result, Stainless Steel 316Ti Blind Flanges is commonly applied to high temperature equipment, such as gaskets and expansion joints, along with rocket engine and chemical manufacturing.

Stainless Steel 316Ti Flanges | Stainless Steel 316Ti Flanges | Stainless Steel 316Ti Flanges | Stainless Steel 316Ti Flanges | Stainless Steel 316Ti Flanges | Stainless Steel 316Ti Flanges | Stainless Steel 316Ti Flanges | Stainless Steel 316Ti Flanges | Stainless Steel 316Ti Flanges

In addition to its heat resistance properties, our Stainless Steel 316Ti Socket Weld Flanges also enjoys better resistance against creep and stress rupture corrosions. This is another advantage of Stainless Steel 316Ti Lap Joint Flanges, as its characteristics may be better suited for environments where stabilization is a primary concern. Our Stainless Steel 316Ti Ring Joint Type Flanges is known for being workable under all common welding techniques, along with hot and cold working.

Stainless Steel 316Ti Pipe Flanges Specifications
Specifications : ASTM A182 / ASME SA182
Size : 1/2″ (15 NB) to 48″ (1200NB)
Standards
: ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.
Class / Pressure : 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.
Standard : ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.

SS 316Ti Pipe Flanges Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
SS 316Ti 0.08 max 2 max 0.75 max 0.045 max 0.030 max 16.00 – 18.00 2.00 – 3.00 10.00 – 14.00 68.395 min

Stainless Steel 316Ti Plate Flanges Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1399 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 316Ti Stainless Steel Industrial Pipe Flanges

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 316Ti 1.4571 S31635 SUS 316Ti 320S31 08Ch17N13M2T Z6CNDT17‐123 X6CrNiMoTi17-12-2

SS 316Ti Flanges Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Stainless Steel 316Ti Pipe Flanges Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Stainless Steel 316Ti Flanges

Ninthore Overseas is one of the Leading Manufacturer And Exporter of Stainless Steel 316Ti Flanges, which shows resistance against acid corrosion in a variety of environments. Lower temperatures provide better resistance, but Stainless Steel 316Ti Slip On Flanges is able to withstand up to a 10 % acid solution, that has been diluted, at elevated temperatures.

Product Brand: Ninthore Overseas

Product In-Stock: InStock

Editor's Rating:
5