Ninthore Overseas is One Of The Leading Manufacturer And Exporter Of High Quality Duplex S31803 Tube to Female Fittings, which is normally supplied in the solution – annealed condition. Forging of these Duplex S31803 Tube Fittings should be started immediately the stock is removed from the reheat furnace and 25 % / 40 % reductions help to retain as much internal heat as possible. For optimum corrosion resistance, forged parts of Duplex S32205 Tube Fittings should be subsequently annealed. Treatment of these Duplex S31803 Compression Fittings is carried out at 2050 Degree F (1120 Degree C) followed by water quench or rapid air cool.

Duplex S31803 Tube to Female Fittings Manufacturer In India | Duplex S31803 Tube to Female Fittings Manufacturer In Mumbai | Duplex S31803 Tube to Female Fittings Exporter In India | Duplex S31803 Tube to Female Fittings Exporter In Mumbai | Duplex S31803 Tube to Female Fittings Supplier In India | Duplex S31803 Tube to Female Fittings Supplier In Mumbai | Duplex S31803 Tube to Female Fittings Stockist In India | Duplex S31803 Tube to Female Fittings Stockist In Mumbai
Duplex S31803 Tube to Female Fittings

Duplex S31803 Tube to Female Fittings

The treatment in Duplex S32205 Compression Fittings is performed after hot working to ensure optimum corrosion resistance and between cold – working operations. These Duplex S31803 Female Connector Fittings is considered moderate till difficult to machine, but can be machined using conventional methods. Duplex S32205 Female Connector Fittings has a high work hardening rate, and efficient machining requires rigid and overpowered machines, sharp tools, preferably carbide – tipped, and heavy, constant feeds.

In chemical processing applications, these Duplex S31803 Ferrule Fittings has exceptional resistance to sulphuric, hydrochloric, formic, acetic, and phosphoric acids. Duplex S32205 Ferrule Fittings performs well in environments containing acid chlorides, solvents and acetic anhydride. These Duplex S31803 Double Ferrule Fittings is one of the few grades that withstand wet chlorine gas, hypochlorite and chlorine dioxide solutions.

Duplex S31803 / S32205 Tube to Female Pipes Specifications
Specifications : ASTM A815 ASME SB815
Size : OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″
Thread : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Pressure Rating
: 3000 – 4000 PSI
Applicable Temperature
: 150-400 C
Type
: Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting.
S31803 / S32205 Duplex Tube to Female Pipes Fitting Chemical Composition
S31803 / S32205 C N P Si Mn Mo Fe Cr S Ni
1.0 0.03 0.02 2.0 3.0 – 3.5 22.0 – 23.0 0.03 4.5 – 6.5 0.14 – 0.2 Bal
Duplex Steel S31803 / S32205 Tube to Female Pipes Fitting Mechanical Properties
S31803 / S32205 Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
7.8 g/cm3 1350 °C (2460 °F) Psi – 80000 , MPa – 550 Psi – 116000 , MPa – 800 15 %
Equivalent Grades for S31803 / S32205 Duplex Stainless Steel Tube to Female Pipes Fitting
STANDARD UNS WERKSTOFF NR.
Duplex S31803 S31803 1.4462
Duplex S32205 S32205 1.4462
Duplex S31803 / S32205 Tube to Female Pipes Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Duplex S31803 / S32205 Tube to Female Pipes Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 102014/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 102014 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 102014/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing
We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10S31803 / S322054 3.1 and EN 10S31803 / S322054 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Duplex S31803 Tube to Female Fittings

Ninthore Overseas is One Of The Leading Manufacturer And Exporter Of High Quality Duplex S31803 Tube to Female Fittings, which is normally supplied in the solution – annealed condition. Forging of these Duplex S31803 Tube Fittings should be started immediately the stock is removed from the reheat furnace and 25 % / 40 % reductions help to retain as much internal heat as possible

Product Brand: Ninthore Overseas

Product In-Stock: InStock

Editor's Rating:
5