Ninthore Overseas is one of the Leading Manufacturer And Exporter Of High Quality Incoloy 330 Tube to Female Fittings to the clients, which has a low coefficient of expansion, excellent ductility, and high strength. In fact, the work hardening rate of Inconel 330 Tube Fittings is similar to that of stainless steel 305. Inconel 330 Compression Fittings performs well under cyclic conditions of heating and cooling and in alternate carburizing and oxidizing atmospheres. Due to its relatively high strength and work hardening rate, Inconel 330 Female Connector Fittings is more difficult to cold form than standard 18 – 8 stainless steels.

Incoloy 330 Tube to Female Fittings Manufacturer In India | Incoloy 330 Tube to Female Fittings Manufacturer In Mumbai |Incoloy 330 Tube to Female Fittings Exporter In India | Incoloy 330 Tube to Female Fittings Exporter In Mumbai |Incoloy 330 Tube to Female Fittings Supplier In India | Incoloy 330 Tube to Female Fittings Supplier In Mumbai | Incoloy 330 Tube to Female Fittings Stockist In India | Incoloy 330 Tube to Female Fittings Stockist In Mumbai
Incoloy 330 Tube to Female Fittings

Incoloy 330 Tube to Female Fittings

In general, nickel alloys except alloy 600 outperform Ra 330 Female Connector Fittings in creep strength, which are further often encountered in extreme environments. SS 330 Female Connector Fittings is often used in Off – Shore Oil Drilling Companies, Petrochemicals, Power Generation and more. Carburization and oxidation resistance of Ra 330 Tube Fittings to 2100 Degree F (1148 Degree C) are enhanced by a nominal 1.25 % silicon addition.

SS 330 Tube Fittings are also used in the following applications: Furnaces, muffles, retorts and conveyor systems; Industrial heating; Heat treating baskets and fixtures. Ra 330 Compression Fittings have resistant to thermal shock, good strength at elevated temperature, and also chloride ion stress corrosion cracking resistance. SS 330 Compression Fittings is also used for everything from resistors, mechanical components, springs and heating applications.

Incoloy 330/ SS 330/ Ra 330 Tube to Female Pipes Specifications
Specifications : ASTM B366 ASME SB 366
Size : OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″
Thread : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Pressure Rating : 3000 – 330/ SS 330/Ra 3300 PSI
Applicable Temperature
: 150-400 C
Type
: Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting.
330 Incoloy Alloy Tube to Female Pipes Fitting Chemical Composition
Grade C Mn Si P S Cr Cu N
330 min. 0.75 17.0 34.0
max. 0.08 2.0 1.50 0.030 20.0 37.0
Equivalent Grades for ss 330 Incoloy Tube to Female Pipes Fitting
Grade UNS No Old British Euronorm GOST Japanese JIS
BS En No AFNOR
Incoloy 330 N08330 1.4886
Incoloy Alloy 330/ SS 330/ Ra 330 Tube to Female Pipes Application Industries
  • Off-Shore Oil Drilling Companies
    Power Generation
    Petrochemicals
    Gas Processing
    Specialty Chemicals
    Pharmaceuticals
    Pharmaceutical Equipment
    Chemical Equipment
    Sea Water Equipment
    Heat Exchangers
    Condensers
    Pulp and Paper Industry
Incoloy 330/ SS 330/ Ra 330 Tube to Female Pipes Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing
We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Incoloy 330 Tube to Female Fittings

Ninthore Overseas is one of the Leading Manufacturer And Exporter Of High Quality Incoloy 330 Tube to Female Fittings to the clients, which has a low coefficient of expansion, excellent ductility, and high strength. In fact, the work hardening rate of Inconel 330 Tube Fittings is similar to that of stainless steel 305.

Product Brand: Ninthore Overseas

Product In-Stock: InStock

Editor's Rating:
5
Send us your Enquiry

Send us your requirements and we shall get back to you soon.

    X
    CONTACT US