Ninthore Overseas is one of the Leading Manufacturer And Exporter Of High Quality Incoloy 800 Tube to Female Fittings, which has excellent creep strength at temperatures above 1290 Degree F (700 Degree C). Incoloy 800 Tube Fittings is often used in Ethylene furnace quench boilers, Hydrocarbon cracking, Valves, fittings and other components exposed to corrosive attack from 1100 Degree F – 1800 Degree F. Incoloy 800H Tube Fittings is also used in Heat exchangers and process piping, along with Carburizing fixtures and retorts. For applications in Incoloy 800HT Tube Fittings requiring greater resistance to stress rupture and creep, especially at temperatures above 1500 Degree F (816 Degree C), 800HT are used.

Incoloy 800 Tube to Female Fittings Manufacturer In India | Incoloy 800 Tube to Female Fittings Manufacturer In Mumbai |Incoloy 800 Tube to Female Fittings Exporter In India | Incoloy 800 Tube to Female Fittings Supplier In India | Incoloy 800 Tube to Female Fittings Supplier In India | Incoloy 800 Tube to Female Fittings Stockist In India | Incoloy 800 Tube to Female Fittings Stockist In Mumbai 
Incoloy 800 Tube to Female Fittings

Incoloy 800 Tube to Female Fittings

Machining characteristics of Incoloy 800 Compression Fittings are similar to that of iron – based alloys. For high temperature applications requiring optimum rupture and creep properties, Incoloy 800H Compression Fittings are used. Incoloy 800HT Compression Fittings has always been known to contain properties for high temp strength and resistance to carburization, oxidation and other high temp corrosion.

These additions allow Incoloy 800 Female Connector Fittings to adapt to the needs of a variety of industries and enable leading metal companies to offer a range of Incoloy shapes and designs. Alloy 800 Tube Fittings is used in the heat processing equipment, industrial incinerators, chemical processing industries etc. In hot or concentrated solutions, rates of Alloy 800 Compression Fittings are usually too high for reasonable service life.

Incoloy 800/800H/800HT Tube to Female Pipes Specifications
Specifications : ASTM B366 ASME SB 366
Size : OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″
Thread : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Pressure Rating
: 3000 – 800/800H/800HT0 PSI
Applicable Temperature
: 150-400 C
Type
: Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting.
800/ 800H/ 800HT Incoloy Alloy Tube to Female Pipes Fitting Chemical Composition
Grade C Mn Si Fe S Cr Al-Ti Ni
800 min. 39.5 19.0 0.15 30.0
max. 0.1 1.5 1.0 0.015 23.0 0.60 35.0
800H min. 0.05 39.5 19.0 0.15 30.0
max. 0.1 1.5 1.0 0.015 23.0 0.60 35.0
800HT min. 0.06 39.5 19.0 0.85/0.25 30.0
max. 0.1 1.5 1.0 0.015 23.0 1.20/0.60 35.0
Incoloy Alloy 800/ 800H/ 800HT Tube to Female Pipes Fitting Mechanical Properties
Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
800-H-HT Psi – 75,000 , MPa – 520 Psi – 30,000 , MPa –205 30
Equivalent Grades for 800 / 800H / 800HT Incoloy Tube to Female Pipes Fitting
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN OR
Incoloy 800 1.4876 N08800 NCF 800 NA 15 ЭИ670 Z8NC32-21 X10NiCrAlTi32-20 XH32T
Incoloy 800H 1.4958 / 1.4876 N08810 NCF 800H NA 15(H) ЭИ670 Z8NC33-21 X5NiCrAlTi31-20 XH32T
Incoloy 800HT 1.4859 / 1.4876 N08811 NCF 800HT NA 15(HT) ЭИ670 X8NiCrAlTi32-21 XH32T
Incoloy Alloy 800/800H/800HT Tube to Female Pipes Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Incoloy 800/800H/800HT Tube to Female Pipes Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Incoloy 800 Tube to Female Fittings

Ninthore Overseas is one of the Leading Manufacturer And Exporter Of High Quality Incoloy 800 Tube to Female Fittings, which has excellent creep strength at temperatures above 1290 Degree F (700 Degree C). Incoloy 800 Tube Fittings is often used in Ethylene furnace quench boilers, Hydrocarbon cracking, Valves, fittings and other components exposed to corrosive attack from 1100 Degree F – 1800 Degree F.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
Send us your Enquiry

Send us your requirements and we shall get back to you soon.

    X
    CONTACT US