Ninthore Overseas is one of the Leading Manufacturer And Exporter Of High Quality Inconel 718 Tube to Female Fittings, which is age – harden able with a unique property of slow aging response that permits heating and cooling during annealing without the danger of cracking. Inconel 718 Tube Fittings can be readily machined but due to its high strength and work hardening characteristics, tooling, operating speeds and coolants should be considered. After fabrication, Inconel 718 Compression Fittings can be heat treated as required and as per the applicable specification. Inconel 718 Female Connector Fittings is usually provided in the solution annealed condition, but can be also being supplied in the aged hardened or precipitation heat treated condition prior to forming.

Inconel 718 Tube to Female Fittings Manufacturer In India | Inconel 718 Tube to Female Fittings Manufacturer In Mumbai | Inconel 718 Tube to Female Fittings Exporter In India | Inconel 718 Tube to Female Fittings Supplier In India | Inconel 718 Tube to Female Fittings Supplier In Mumbai | Inconel 718 Tube to Female Fittings Stockist In India | Inconel 718 Tube to Female Fittings Stockist In Mumbai
Inconel 718 Tube to Female Fittings

Inconel 718 Tube to Female Fittings

Inconel 718 Ferrule Fittings has been used world – wide in aerospace, aircraft, oil, and chemical industries, and also nuclear power plants because of its high strength, excellent ductility, good formability and weldability, etc. These Inconel 718 Double Ferrule Fittings is actually an age – harden able Nickel – Chromium – Columbium (Niobium) – Molybdenum alloy with high strength, corrosion – resistance, and good fabrication characteristics.

Inconel 718 Compression Tube Fittings is a high strength nickel – chromium material and a nickel super alloy frequently used for cryogenic storage tanks, turbines, down hole shafting and well head parts. We have met every challenge of providing quality, timely, cost – effective solutions for these Alloy 718 Tube Fittings and specialty fastener applications.

Inconel 718 Tube to Female Pipes Specifications
Specifications : ASTM B366 ASME SB 366
Size : OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″
Thread : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Pressure Rating
: 3000 – 7180 PSI
Applicable Temperature
: 150-400 C
Type
: Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting.
718 Inconel Alloy Tube to Female Pipes Fitting Chemical Composition
Grade C Mn Si Fe S Cr Al Ni
718 min. bal 17.0 0.2 50.0
max. 0.08 0.35 0.35 bal 0.01 21.0 0.8 55.0
Inconel Alloy 718 Tube to Female Pipes Fitting Mechanical Properties
Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
825 8.14 g/cm3
1400 °C (2550 °F)
Psi – 80,000 , MPa – 550 Psi – 32,000 , MPa – 220 30 %
Equivalent Grades for 718 Inconel Tube to Female Pipes Fitting
Grade UNS No Old British Euronorm GOST Japanese JIS
BS En No AFNOR
Inconel 718 N07718 2.4668
Inconel Alloy 718 Tube to Female Pipes Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Inconel 718 Tube to Female Pipes Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing
We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Inconel 718 Tube to Female Fittings

Ninthore Overseas is one of the Leading Manufacturer And Exporter Of High Quality Inconel 718 Tube to Female Fittings, which is age – harden able with a unique property of slow aging response that permits heating and cooling during annealing without the danger of cracking.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
Send us your Enquiry

Send us your requirements and we shall get back to you soon.

    X
    CONTACT US