Ninthore Overseas is one of the Leading Manufacturer And Exporter Of High Quality Nickel Alloy 200 Tube to Female Fittings, which is used in the section of Alkylation units in direct contact with concentrated hydrofluoric acid. Nickel 200 Tube Fittings can easily be welded by gas – tungsten arc, gas metal arc or shielded metal arc processes using appropriate filler metals. The nickel and copper contents of Nickel 200 Compression Tube Fittings were in the approximate ratio which is now formally specified for the alloy. Nickel 200 Female Connector Fittings is a precipitation – harden able nickel – copper alloy that combines high strength, corrosion resistance and non – magnetic properties.

Nickel Alloy 200 Tube to Female Fittings Manufacturer In India | Nickel Alloy 200 Tube to Female Fittings Manufacturer In Mumbai | Nickel Alloy 200 Tube to Female Fittings Exporter In India | Nickel Alloy 200 Tube to Female Fittings Exporter In Mumbai | Nickel Alloy 200 Tube to Female Fittings Supplier In India | Nickel Alloy 200 Tube to Female Fittings Supplier In Mumbai | Nickel Alloy 200 Tube to Female Fittings Stockist In India | Nickel Alloy 200 Tube to Female Fittings Stockist In Mumbai
Nickel Alloy 200 Tube to Female Fittings

Nickel Alloy 200 Tube to Female Fittings

There is no need for post weld heat treatment in Nickel 200 Compression Fittings, however, thorough cleaning after welding is critical for optimum corrosion resistance, otherwise there is the risk of contamination and embrittlement. Like most other nickel alloys, Nickel 200 Ferrule Tube Fittings is typically tough to machine and will work harden. Nickel 200 Double Ferrule Tube Fittings has excellent results which can be obtained if you make the correct choices for tooling and machining.

Alloy 200 Female Connector Fittings is a solid – solution binary alloy, which can be readily joined and fabricated. As nickel and copper are mutually soluble in all proportions, Alloy 200 Compression Tube Fittings is a single – phase alloy. Alloy 200 Ferrule Tube Fittings is perhaps the most resistant of all commonly used engineering alloys.

Nickel 200 Tube to Female Pipes Specifications
Specifications : ASTM B366 ASME SB 366
Size : OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″
Thread : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Pressure Rating
: 3000 – 4000 PSI
Applicable Temperature
: 150-400 C
Type
: Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting.
200 Nickel Alloy Tube to Female Pipes Fitting Chemical Composition
Nickel 200 Ni C Mo Mn Si Fe P S Cu Cr
99.0 min 0.15 max 0.35 max 0.1 max 0.4 max 0.01 max 0.25 max
Nickel Alloy 200 Tube to Female Pipes Fitting Mechanical Properties
Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.9 g/cm3 1446 °C (2635 °F) Psi – 21500 , MPa – 148 Psi – 67000 , MPa – 462 45 %
Equivalent Grades for 200 Nickel Tube to Female Pipes Fitting
STANDARD UNS WERKSTOFF NR. AFNOR EN JIS BS GOST
Nickel 200 N02200 2.4066 N-100M Ni 99.2 NW 2200 NA 11 НП-2
Nickel Alloy 200 Tube to Female Pipes Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Nickel 200 Tube to Female Pipes Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Nickel Alloy 200 Tube to Female Fittings

Ninthore Overseas is one of the Leading Manufacturer And Exporter Of High Quality Nickel Alloy 200 Tube to Female Fittings, which is used in the section of Alkylation units in direct contact with concentrated hydrofluoric acid. Nickel 200 Tube Fittings can easily be welded by gas – tungsten arc, gas metal arc or shielded metal arc processes using appropriate filler metals.

Product Brand: Ninthore Overseas

Product In-Stock: InStock

Editor's Rating:
5
Send us your Enquiry

Send us your requirements and we shall get back to you soon.

    X
    CONTACT US