Ninthore Overseas is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 410 Tube to Female Pipes, which is the higher carbon version of the alloy. These Stainless Steel 410 Tube Fittings was developed for enhanced creep resistance and for higher strength at temperatures above 1000 Degree F (537 Degree C). In most instances, the carbon content of Stainless Steel 410 Compression Fittings enables dual certification. These Stainless Steel 410 Female Connector Fittings cannot be hardened by heat treatment, only by cold working. Stainless Steel 410 Ferrule Fittings can be easily welded and processed by standard shop fabrication practices.

Stainless Steel 410 Tube to Female Pipes Manufacturer In India | Stainless Steel 410 Tube to Female Pipes Manufacturer In Mumbai | Stainless Steel 410 Tube to Female Pipes Exporter In India | Stainless Steel 410 Tube to Female Pipes Exporter In Mumbai | Stainless Steel 410 Tube to Female Pipes Supplier In India | Stainless Steel 410 Tube to Female Pipes Supplier In Mumbai | Stainless Steel 410 Tube to Female Pipes Stockist In India | Stainless Steel 410 Tube to Female Pipes Stockist In Mumbai
Stainless Steel 410 Tube to Female Pipes

Stainless Steel 410 Tube to Female Pipes

These Stainless Steel 410 Double Ferrule Fittings can be used in nitric solutions and also in most diluted organic acids at moderate temperatures. SS 410 Tube Fittings used in pure phosphoric acid at lower temperatures and up to 10 % diluted solutions at elevated temperatures. These SS 410 Compression Fittings resists polyphonic acid stress corrosion cracking in hydrocarbon service. SS 410 Female Connector Fittings can also be utilized in chloride or fluoride free caustic solutions at moderate temperatures.

These SS 410 Ferrule Fittings does not perform well in chloride solutions, even in small concentrations, or in sulphuric acid. The high Sulphur content of SS 410 Double Ferrule Fittings also has a detrimental impact on hot workability. If hot forming is required, once again, these SS 410 Compression Tube Fittings should be considered as an alternate selection.

Stainless Steel 410 Tube to Female Pipes Specifications
Specifications : ASTM A276 ASME SA 479
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass
410 Stainless Steel Tube to Female Pipes Fitting Chemical Composition
Grade C Mn Si P S Cr Mo Ni N
410 min. 11.5
max. 0.15 1.0 1.00 0.040 0.030 13.5 0.75
Stainless Steel 410 Tube to Female Pipes Fitting Mechanical Properties
Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
410 480 275 16 95 201
Stainless Steel 410 Tube to Female Pipes Fitting Physical Properties
Grade Density (kg/m3) Elastic Modulus (GPa) Mean Coefficient of Thermal Expansion (m/m/0C) Thermal Conductivity (W/m.K) Specific Heat 0-1000C (J/kg.K) Electrical Resistivity (n.m)
0-1000C 0-3150C 0-5380C at 1000C at 5000C
410 7750 200 9.9 11.4 11.6 24.9 28.7 460 570
Equivalent Grades for 410 Stainless Steel Tube to Female Pipes Fitting
Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
410 S41000 410S21 56A 1.4006 X12Cr13 2302 SUS 410
SS 410 Tube to Female Pipes Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Stainless Steel 410 Tube to Female Pipes Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing
We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Stainless Steel 410 Tube to Female Pipes

Ninthore Overseas is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 410 Tube to Female Pipes, which is the higher carbon version of the alloy. These Stainless Steel 410 Tube Fittings was developed for enhanced creep resistance and for higher strength at temperatures above 1000 Degree F (537 Degree C).

Product Brand: Ninthore Overseas

Product In-Stock: InStock

Editor's Rating:
5
Send us your Enquiry

Send us your requirements and we shall get back to you soon.

    X
    CONTACT US